The new entry point in the series, Tower, employs solid Long-Grain Copper (LGC) conductors, and many features used throughout the Bridges & Falls lineup, including Asymmetrical Double-Balanced Geometry, Foamed-Polyethylene insulation, Metal-Layer Noise-Dissipation System (NDS), and Cold-Welded Gold-Plated RCA plugs. Compared with the next step up the line, Evergreen, Tower uses slightly smaller conductors for cost-effective performance. Solid Long-Grain Copper Conductors (LGC) Solid conductors eliminate strand-interaction distortion. Evergreen's solid Long-Grain Copper allows a smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper. OFHC is a general metal industry specification regarding “loss” without any concern for distortion. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance. Foamed-Polyethylene Insulation Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy (loss). Some of this energy is stored and then released as distortion. Evergreen uses air-filled Foamed-Polyethylene Insulation on both conductors because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials. Metal-Layer Noise-Dissipation System (NDS) 100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Noise-Dissipation System prevents a significant amount of RFI from reaching the equipment’s ground plane. Double-Balanced Asymmetrical Geometry Purpose designed for single-ended applications, Double-Balanced Asymmetrical Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance. Cold-Welded Gold-Plated RCA Plugs This proprietary, novel plug design allows for a connection devoid of solder, which is a common source of distortion. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion instead of machine ability. Specifications Geometry: Asymmetrical Double-Balanced (lower impedance on ground, same quality + & - conductors) Metal: Solid Long-Grain Copper (LGC) Conductors Dielectric: Foamed-Polyethylene Insulation Noise-Dissipation System (NDS): Metal-Layer Noise-Dissipation System RCA Plugs: Cold-Welded, Gold-Plated Jacket Colour: Black/white stripe PVC Deklaracija : Naziv: AUDIOQUEST Tower 3.5mm-3.5mm Vrsta robe: INTERKONEKT KABAL Uvoznik: 4 AUDIO DOO Zemlja proizvodnje: KINA